{"id":10824,"date":"2026-06-04T10:54:12","date_gmt":"2026-06-04T08:54:12","guid":{"rendered":"https:\/\/www.mom-packaging.com\/?p=10824"},"modified":"2026-07-23T15:20:48","modified_gmt":"2026-07-23T13:20:48","slug":"complete-guide-to-industrial-liquid-filling","status":"publish","type":"post","link":"https:\/\/www.mom-packaging.com\/en\/complete-guide-to-industrial-liquid-filling\/","title":{"rendered":"Complete guide to industrial liquid filling"},"content":{"rendered":"<h2>How to use this guide<\/h2>\n<ul>\n<li><a href=\"#behaviour\">Understanding liquid behaviour<\/a><\/li>\n<li><a href=\"#technology\">Identifying the right dosing technology<\/a><\/li>\n<li><a href=\"#nozzles\">Choosing the right filling nozzle<\/a><\/li>\n<li><a href=\"#environment\">Understanding constraints and specific requirements<\/a><\/li>\n<li><a href=\"#trials\">Validating choices through trials<\/a><\/li>\n<\/ul>\n<p>&nbsp;<\/p>\n<h2>Technical guides by liquid type<\/h2>\n<ul>\n<li><a href=\"https:\/\/www.mom-packaging.com\/en\/foaming-product-filling\/\">Filling foaming products<\/a><\/li>\n<li><a href=\"https:\/\/www.mom-packaging.com\/en\/filling-of-viscous-product\/\">Filling viscous products<\/a><\/li>\n<li><a href=\"https:\/\/www.mom-packaging.com\/en\/filling-liquid-chlorine-products\/\">Filling liquid chlorinated products<\/a><\/li>\n<li><a href=\"https:\/\/www.mom-packaging.com\/en\/detergent-filling-machine\/\">Filling detergents<\/a><\/li>\n<\/ul>\n<p>&nbsp;<\/p>\n<h2 id=\"behaviour\">1. Understanding liquid behaviour<\/h2>\n<h3>The different characteristics of liquids<\/h3>\n<p>Before looking at dosing technologies, it is essential to characterize the product \u2014 that is, to understand how the liquid behaves:<\/p>\n<ul>\n<li><strong>Fluid \/ free-flowing liquid:<\/strong> flows freely under gravity. Requires a precise anti-drip nozzle to prevent contamination at the end of the filling cycle (e.g. water, solvents, light oils, liquid pharmaceutical products, etc.)<\/li>\n<li><strong>Foaming liquid:<\/strong> generates foam during filling, particularly when falling into the packaging. Managing foam is critical for dosing cleanliness and dose accuracy (e.g. <a href=\"https:\/\/www.mom-packaging.com\/en\/detergent-filling-machine\/\">detergents<\/a>, dishwashing liquids, certain food products, etc.)<\/li>\n<li><strong>Semi-viscous liquid:<\/strong> flows but with noticeable resistance. Can form threads at the end of the filling cycle if the nozzle is not appropriate (e.g. syrups, certain food oils, fluid cosmetics, etc.)<\/li>\n<li><strong>Viscous \/ pasty liquid:<\/strong> does not flow under gravity alone. Requires a mechanical push system. Cutting the thread at the end of dosing is a key challenge (e.g. honey, creams, adhesives, gels, etc.)<\/li>\n<li><strong>Liquid with particles:<\/strong> contains suspended particles or solid fragments. Volumetric dosing may be affected; weight-based dosing is often preferred to maintain accuracy (e.g. sauces with pieces, cosmetics with beads, etc.)<\/li>\n<li><strong>Corrosive \/ chlorinated liquid:<\/strong> attacks materials in contact with the product \u2014 stainless steel in particular. Material selection and vapour management are critical (e.g. <a href=\"https:\/\/www.mom-packaging.com\/en\/filling-liquid-chlorine-products\/\">chlorinated products<\/a>, acids, bases, etc.)<\/li>\n<\/ul>\n<p>Each of these characteristics plays a role in selecting the right technology and tooling. That is why MOM places such importance on <strong>understanding the physical and chemical properties<\/strong> of the liquid before defining any equipment.<\/p>\n<h3>Key parameters for characterizing a liquid<\/h3>\n<ul>\n<li><strong>Dynamic viscosity<\/strong> (in Pa.s, and its variation with temperature)<\/li>\n<li><strong>Filling temperature<\/strong> (viscosity varies significantly with temperature)<\/li>\n<li><strong>Physical characteristics<\/strong> (e.g. foaming tendency, particle content) <strong>and chemical characteristics<\/strong> (e.g. corrosiveness, pH)<\/li>\n<li><strong>Batch-to-batch variability<\/strong><\/li>\n<\/ul>\n<p>These parameters already strongly guide the technology, nozzle type, and product feed design for industrial liquid filling.<\/p>\n<h2 id=\"technology\">2. The appropriate dosing technologies<\/h2>\n<h3>Main dosing technologies<\/h3>\n<p>There are several major families of solutions for <a href=\"https:\/\/www.mom-packaging.com\/en\/our-equipments\/liquids\/choosing-a-liquid-filling-machine\/\">liquid dosing<\/a>, each with its own advantages and limitations: <strong>gravity<\/strong>, <strong>volumetric<\/strong>, <strong>weight-based<\/strong>, <strong>constant-level<\/strong> and <strong>piston<\/strong> dosing (mechanical or pneumatic). In practice, the difference lies as much in the technology as in the <strong>nozzle design<\/strong> and the <strong>product feed configuration<\/strong>.<\/p>\n<table>\n<thead>\n<tr>\n<th>Technology<\/th>\n<th>Suitable liquid type<\/th>\n<th>Accuracy<\/th>\n<th>Typical application<\/th>\n<th>Key considerations<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Gravity<\/td>\n<td>Fluid, free-flowing<\/td>\n<td>Moderate<\/td>\n<td>Water, light solvents<\/td>\n<td>Sensitive to pressure variations in the tank<\/td>\n<\/tr>\n<tr>\n<td>Volumetric<\/td>\n<td>Fluid to semi-viscous, foaming<\/td>\n<td>Good<\/td>\n<td>Cosmetics, detergents, syrups<\/td>\n<td>Less suitable for liquids with particles<\/td>\n<\/tr>\n<tr>\n<td>Weight-based (ponderal)<\/td>\n<td>Fluid to semi-viscous, liquids with particles<\/td>\n<td>Very good<\/td>\n<td>Food, chemical, pharmaceutical industries<\/td>\n<td>Throughput more limited at very high speeds<\/td>\n<\/tr>\n<tr>\n<td>Constant-level<\/td>\n<td>Fluid to semi-viscous<\/td>\n<td>Good (visual)<\/td>\n<td>Transparent bottles, perfumery<\/td>\n<td>Less accurate by weight if density varies<\/td>\n<\/tr>\n<tr>\n<td>Pneumatic piston<\/td>\n<td>Semi-viscous to viscous<\/td>\n<td>Moderate<\/td>\n<td>Low added-value products<\/td>\n<td>Dependent on compressed air quality; higher maintenance<\/td>\n<\/tr>\n<tr>\n<td>Mechanical piston (cam)<\/td>\n<td>Viscous to pasty<\/td>\n<td>Excellent<\/td>\n<td>Honey, creams, adhesives, gels<\/td>\n<td>Higher initial investment than pneumatic<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h3>How to choose the right technology?<\/h3>\n<p>In industrial liquid filling, the choice of dosing technology depends first on <strong>product characteristics<\/strong>, <strong>production objectives<\/strong> and the <strong>packaging<\/strong>. The recommended approach is:<\/p>\n<ol>\n<li><strong>Characterize your liquid<\/strong> (viscosity, foaming tendency, corrosiveness, particles, batch-to-batch variability)<\/li>\n<li><strong>Define your objectives<\/strong>: dose, throughput, accuracy, cleanliness level, cleaning \/ product changeover requirements<\/li>\n<li><strong>Select the technology and define the appropriate nozzle<\/strong><\/li>\n<li><strong>Validate through trials<\/strong> on your real products, in your real packaging<\/li>\n<\/ol>\n<p>The product&#8217;s characteristics and the expected performance drive the solution. MOM&#8217;s team is available to analyse your specifications.<\/p>\n<h2 id=\"nozzles\">3. Choosing the right filling nozzle<\/h2>\n<p>The nozzle is the element in direct contact with both the product and the packaging. It determines <strong>dosing cleanliness<\/strong>: no drips, no threads, no overflowing foam. There is no universal nozzle: each product family requires an adapted nozzle.<\/p>\n<h3>Fluid to semi-viscous liquids<\/h3>\n<ul>\n<li><strong>Simple flap nozzle:<\/strong> metal-to-metal seal, no gasket. Easy to clean, autoclavable without disassembly. Requires a perfect surface finish to ensure sealing.<\/li>\n<li><strong>Gasket flap nozzle:<\/strong> for semi-viscous liquids where viscosity prevents the simple flap from returning to its seat. Compatible with liquids containing small particles.<\/li>\n<\/ul>\n<h3>Foaming liquids<\/h3>\n<ul>\n<li><strong>Diving nozzle (bottom-up filling):<\/strong> the nozzle descends into the packaging and rises during filling. Effective against foam, but reduces throughput, increases changeover time, and carries a risk of cross-contamination.<\/li>\n<li><strong>Screen nozzle:<\/strong> converts turbulent flow into laminar flow. Prevents dripping by capillary action. Effective in 75% of cases. Not suitable for viscous products (risk of threads).<\/li>\n<li><strong>Spout nozzle:<\/strong> the most advanced solution. The spout (constriction) maximises the effect of the screens for a diffuse, laminar flow. No diving = no cross-contamination risk. Less expensive than the diving nozzle. Plug &amp; play. No drip at end of dosing. More information: <a href=\"https:\/\/www.mom-packaging.com\/en\/foaming-product-filling\/\">filling foaming products<\/a>.<\/li>\n<\/ul>\n<h3>Viscous and pasty liquids<\/h3>\n<ul>\n<li><strong>Ball valve nozzle:<\/strong> the rotation of the ball mechanically cuts the thread. Particularly effective for highly viscous products. Mechanical actuation is preferred over pneumatic to ensure a clean cut. Slaved to the dosing system, it does not affect throughput. Key consideration: longer disassembly time and gaskets required (not autoclavable as-is). More information: <a href=\"https:\/\/www.mom-packaging.com\/en\/filling-of-viscous-product\/\">filling viscous products<\/a>.<\/li>\n<\/ul>\n<table>\n<thead>\n<tr>\n<th>Nozzle type<\/th>\n<th>Suitable liquid<\/th>\n<th>Anti-drip<\/th>\n<th>Anti-foam<\/th>\n<th>Cleaning<\/th>\n<th>Throughput<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Simple flap<\/td>\n<td>Fluid<\/td>\n<td>Yes<\/td>\n<td>\u2014<\/td>\n<td>Autoclave without disassembly<\/td>\n<td>High<\/td>\n<\/tr>\n<tr>\n<td>Gasket flap<\/td>\n<td>Semi-viscous<\/td>\n<td>Yes<\/td>\n<td>\u2014<\/td>\n<td>Simple disassembly<\/td>\n<td>High<\/td>\n<\/tr>\n<tr>\n<td>Diving nozzle<\/td>\n<td>Foaming<\/td>\n<td>Partial<\/td>\n<td>Yes<\/td>\n<td>Complex changeover adjustments<\/td>\n<td>Reduced<\/td>\n<\/tr>\n<tr>\n<td>Screen nozzle<\/td>\n<td>Foaming (fluid)<\/td>\n<td>Yes<\/td>\n<td>Yes (75% of cases)<\/td>\n<td>Simple<\/td>\n<td>Standard<\/td>\n<\/tr>\n<tr>\n<td>Spout nozzle<\/td>\n<td>Foaming (all types)<\/td>\n<td>Yes<\/td>\n<td>Yes<\/td>\n<td>Plug &amp; play<\/td>\n<td>Standard to high<\/td>\n<\/tr>\n<tr>\n<td>Ball valve<\/td>\n<td>Viscous to pasty<\/td>\n<td>Yes<\/td>\n<td>\u2014<\/td>\n<td>Longer disassembly<\/td>\n<td>Standard<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2 id=\"environment\">4. Environments and constraints<\/h2>\n<p>Beyond the product itself, an industrial liquid filling project also depends on <a href=\"https:\/\/www.mom-packaging.com\/en\/your-needs\/specific-requirements\/\">specific requirements<\/a>: the operating environment, regulatory compliance, and cleanability.<\/p>\n<h3>Legal metrology<\/h3>\n<p>Legal metrology covers the requirements and control procedures to ensure production quality and traceability.<br \/>\nThe term &#8220;ponderal filler&#8221; is a protected designation. It refers to automatic weighing instruments (AWI).<br \/>\nTo manufacture ponderal fillers, a machine builder must hold an EC type-approval certificate.<\/p>\n<h3>IQ\/OQ\/DQ\/PQ qualification and data integrity<\/h3>\n<p>In the pharmaceutical sector, Quality teams often require <strong>IQ\/OQ\/DQ\/PQ qualifications<\/strong>.<br \/>\n<strong>21 CFR Part 11<\/strong> is increasingly required. It governs the management of electronic records and signatures (related to traceability and data integrity requirements).<br \/>\nOther industries, including cosmetics and food, are also increasingly requesting these qualifications and CFR 21 Part 11 compliance.<\/p>\n<h3>Cleanrooms and ultra-clean environments<\/h3>\n<p>Ease of cleaning, material and surface selection, and the addition of complementary equipment (e.g. laminar flow hoods) enable filling in cleanroom conditions (ISO 14644-1).<\/p>\n<h3>ATEX zones<\/h3>\n<p>In areas subject to explosion risk (ATEX zones), both electrical and non-electrical equipment must comply with the applicable technical prescriptions. MOM manufactures equipment suitable for these environments.<\/p>\n<h3>Corrosive and chlorinated products<\/h3>\n<p>Chlorine is one of the main enemies of stainless steel. For corrosive products, MOM offers machines built in <strong>PVC<\/strong> or with metal parts treated with <strong>epoxy paint<\/strong>. Fasteners are protected with plastic caps or replaced with inert material screws (e.g. PEEK). A drip tray is mandatory to protect operators and the surrounding environment. Cone-bottom tanks eliminate product retention zones.<\/p>\n<h3>Clean-in-place (CIP)<\/h3>\n<p>Clean-in-place (CIP) is available on MOM automatic equipment, regardless of the piston technology selected. On automatic machines, a recovery tray significantly reduces cleaning time in the event of a line incident.<\/p>\n<h3>Machinery Directive \/ Machinery Regulation (CE)<\/h3>\n<p>In Europe, placing a machine on the market requires the manufacturer to apply safety requirements, document the risk analysis and apply the CE marking. Regulations are evolving: the Machinery Directive is being replaced by Machinery Regulation (EU) 2023\/1230, which applies more uniformly across the EU. In practice, this increases the importance of a clear specification and complete technical documentation from the start of the project.<\/p>\n<p>Filling a liquid is an expertise: each product has its constraints, each environment its requirements, and the nozzle often makes the difference.<\/p>\n<h2 id=\"trials\">5. Industrial validation and trials<\/h2>\n<p>To commit to accuracy, throughput, dosing cleanliness, and cleanability, a machine builder must carry out trials.<\/p>\n<p>MOM organizes trials on your liquid and your packaging formats to validate the technology, the nozzle, dosing cleanliness (no drips, no threads, no foam) and cleaning times. <a href=\"https:\/\/www.mom-packaging.com\/en\/contact\/\"><strong>Let&#8217;s discuss your specification and production constraints.<\/strong><\/a><\/p>\n<p>&nbsp;<\/p>\n<h2>Conclusion<\/h2>\n<p>Industrial liquid filling relies on three decisions: understand the product&#8217;s behaviour and viscosity, select the appropriate dosing technology and nozzle, and validate the solution under conditions close to real production. This guide gathers the fundamental technical principles to structure that decision and guide machine selection. For specific applications, dedicated guides (foaming products, viscous products, chlorinated products, detergents\u2026) allow each concrete case to be explored in depth with MOM Packaging&#8217;s expertise.<\/p>\n<p>MOM Packaging supports manufacturers in more than 60 countries across Europe, Africa, the Middle East, Oceania, the Americas and East Asia.<\/p>\n<p>&nbsp;<\/p>\n<h2>FAQ \u2013 Liquid filling<\/h2>\n","protected":false},"excerpt":{"rendered":"<p>How to use this guide Understanding liquid behaviour Identifying the right dosing technology Choosing the right filling nozzle Understanding constraints and specific requirements Validating choices through trials &nbsp; Technical guides by liquid type Filling foaming products Filling viscous products Filling liquid chlorinated products Filling detergents &nbsp; 1. Understanding liquid behaviour The different characteristics of liquids &#8230;<\/p>\n","protected":false},"author":8,"featured_media":10825,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[43,42],"tags":[],"class_list":["post-10824","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-all-articles","category-fluid-foaming-viscous"],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v27.7 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Complete guide to industrial liquid filling - MOM PACKAGING<\/title>\n<meta name=\"description\" content=\"Complete guide to industrial liquid filling: all liquid types, dosing technologies and selection criteria.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.mom-packaging.com\/en\/complete-guide-to-industrial-liquid-filling\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Complete guide to industrial liquid filling - MOM PACKAGING\" \/>\n<meta property=\"og:description\" content=\"Complete guide to industrial liquid filling: all liquid types, dosing technologies and selection criteria.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.mom-packaging.com\/en\/complete-guide-to-industrial-liquid-filling\/\" \/>\n<meta property=\"og:site_name\" content=\"MOM PACKAGING\" \/>\n<meta property=\"article:published_time\" content=\"2026-06-04T08:54:12+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-07-23T13:20:48+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.mom-packaging.com\/wp-content\/uploads\/2015\/12\/dscn0048-gel-cut-blue.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1280\" \/>\n\t<meta property=\"og:image:height\" content=\"1024\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Aliz\u00e9e Moreau\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Aliz\u00e9e Moreau\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"8 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.mom-packaging.com\\\/en\\\/complete-guide-to-industrial-liquid-filling\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.mom-packaging.com\\\/en\\\/complete-guide-to-industrial-liquid-filling\\\/\"},\"author\":{\"name\":\"Aliz\u00e9e Moreau\",\"@id\":\"https:\\\/\\\/www.mom-packaging.com\\\/#\\\/schema\\\/person\\\/7ad48240968f1edc107f1b57d4a5db40\"},\"headline\":\"Complete guide to industrial liquid filling\",\"datePublished\":\"2026-06-04T08:54:12+00:00\",\"dateModified\":\"2026-07-23T13:20:48+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.mom-packaging.com\\\/en\\\/complete-guide-to-industrial-liquid-filling\\\/\"},\"wordCount\":1445,\"image\":{\"@id\":\"https:\\\/\\\/www.mom-packaging.com\\\/en\\\/complete-guide-to-industrial-liquid-filling\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.mom-packaging.com\\\/wp-content\\\/uploads\\\/2015\\\/12\\\/dscn0048-gel-cut-blue.jpg\",\"articleSection\":[\"All articles\",\"Fluid, foaming &amp; viscous liquid\"],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.mom-packaging.com\\\/en\\\/complete-guide-to-industrial-liquid-filling\\\/\",\"url\":\"https:\\\/\\\/www.mom-packaging.com\\\/en\\\/complete-guide-to-industrial-liquid-filling\\\/\",\"name\":\"Complete guide to industrial liquid filling - MOM PACKAGING\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.mom-packaging.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.mom-packaging.com\\\/en\\\/complete-guide-to-industrial-liquid-filling\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.mom-packaging.com\\\/en\\\/complete-guide-to-industrial-liquid-filling\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.mom-packaging.com\\\/wp-content\\\/uploads\\\/2015\\\/12\\\/dscn0048-gel-cut-blue.jpg\",\"datePublished\":\"2026-06-04T08:54:12+00:00\",\"dateModified\":\"2026-07-23T13:20:48+00:00\",\"author\":{\"@id\":\"https:\\\/\\\/www.mom-packaging.com\\\/#\\\/schema\\\/person\\\/7ad48240968f1edc107f1b57d4a5db40\"},\"description\":\"Complete guide to industrial liquid filling: all liquid types, dosing technologies and selection criteria.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.mom-packaging.com\\\/en\\\/complete-guide-to-industrial-liquid-filling\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.mom-packaging.com\\\/en\\\/complete-guide-to-industrial-liquid-filling\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.mom-packaging.com\\\/en\\\/complete-guide-to-industrial-liquid-filling\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.mom-packaging.com\\\/wp-content\\\/uploads\\\/2015\\\/12\\\/dscn0048-gel-cut-blue.jpg\",\"contentUrl\":\"https:\\\/\\\/www.mom-packaging.com\\\/wp-content\\\/uploads\\\/2015\\\/12\\\/dscn0048-gel-cut-blue.jpg\",\"width\":1280,\"height\":1024},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.mom-packaging.com\\\/en\\\/complete-guide-to-industrial-liquid-filling\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Accueil\",\"item\":\"https:\\\/\\\/www.mom-packaging.com\\\/en\\\/home\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Complete guide to industrial liquid filling\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.mom-packaging.com\\\/#website\",\"url\":\"https:\\\/\\\/www.mom-packaging.com\\\/\",\"name\":\"MOM PACKAGING\",\"description\":\"La Main d&#039;Oeuvre M\u00e9canique\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.mom-packaging.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.mom-packaging.com\\\/#\\\/schema\\\/person\\\/7ad48240968f1edc107f1b57d4a5db40\",\"name\":\"Aliz\u00e9e Moreau\",\"url\":\"https:\\\/\\\/www.mom-packaging.com\\\/en\\\/author\\\/alizeem\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Complete guide to industrial liquid filling - MOM PACKAGING","description":"Complete guide to industrial liquid filling: all liquid types, dosing technologies and selection criteria.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.mom-packaging.com\/en\/complete-guide-to-industrial-liquid-filling\/","og_locale":"en_US","og_type":"article","og_title":"Complete guide to industrial liquid filling - MOM PACKAGING","og_description":"Complete guide to industrial liquid filling: all liquid types, dosing technologies and selection criteria.","og_url":"https:\/\/www.mom-packaging.com\/en\/complete-guide-to-industrial-liquid-filling\/","og_site_name":"MOM PACKAGING","article_published_time":"2026-06-04T08:54:12+00:00","article_modified_time":"2026-07-23T13:20:48+00:00","og_image":[{"width":1280,"height":1024,"url":"https:\/\/www.mom-packaging.com\/wp-content\/uploads\/2015\/12\/dscn0048-gel-cut-blue.jpg","type":"image\/jpeg"}],"author":"Aliz\u00e9e Moreau","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Aliz\u00e9e Moreau","Est. reading time":"8 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.mom-packaging.com\/en\/complete-guide-to-industrial-liquid-filling\/#article","isPartOf":{"@id":"https:\/\/www.mom-packaging.com\/en\/complete-guide-to-industrial-liquid-filling\/"},"author":{"name":"Aliz\u00e9e Moreau","@id":"https:\/\/www.mom-packaging.com\/#\/schema\/person\/7ad48240968f1edc107f1b57d4a5db40"},"headline":"Complete guide to industrial liquid filling","datePublished":"2026-06-04T08:54:12+00:00","dateModified":"2026-07-23T13:20:48+00:00","mainEntityOfPage":{"@id":"https:\/\/www.mom-packaging.com\/en\/complete-guide-to-industrial-liquid-filling\/"},"wordCount":1445,"image":{"@id":"https:\/\/www.mom-packaging.com\/en\/complete-guide-to-industrial-liquid-filling\/#primaryimage"},"thumbnailUrl":"https:\/\/www.mom-packaging.com\/wp-content\/uploads\/2015\/12\/dscn0048-gel-cut-blue.jpg","articleSection":["All articles","Fluid, foaming &amp; viscous liquid"],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/www.mom-packaging.com\/en\/complete-guide-to-industrial-liquid-filling\/","url":"https:\/\/www.mom-packaging.com\/en\/complete-guide-to-industrial-liquid-filling\/","name":"Complete guide to industrial liquid filling - MOM PACKAGING","isPartOf":{"@id":"https:\/\/www.mom-packaging.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.mom-packaging.com\/en\/complete-guide-to-industrial-liquid-filling\/#primaryimage"},"image":{"@id":"https:\/\/www.mom-packaging.com\/en\/complete-guide-to-industrial-liquid-filling\/#primaryimage"},"thumbnailUrl":"https:\/\/www.mom-packaging.com\/wp-content\/uploads\/2015\/12\/dscn0048-gel-cut-blue.jpg","datePublished":"2026-06-04T08:54:12+00:00","dateModified":"2026-07-23T13:20:48+00:00","author":{"@id":"https:\/\/www.mom-packaging.com\/#\/schema\/person\/7ad48240968f1edc107f1b57d4a5db40"},"description":"Complete guide to industrial liquid filling: all liquid types, dosing technologies and selection criteria.","breadcrumb":{"@id":"https:\/\/www.mom-packaging.com\/en\/complete-guide-to-industrial-liquid-filling\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.mom-packaging.com\/en\/complete-guide-to-industrial-liquid-filling\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.mom-packaging.com\/en\/complete-guide-to-industrial-liquid-filling\/#primaryimage","url":"https:\/\/www.mom-packaging.com\/wp-content\/uploads\/2015\/12\/dscn0048-gel-cut-blue.jpg","contentUrl":"https:\/\/www.mom-packaging.com\/wp-content\/uploads\/2015\/12\/dscn0048-gel-cut-blue.jpg","width":1280,"height":1024},{"@type":"BreadcrumbList","@id":"https:\/\/www.mom-packaging.com\/en\/complete-guide-to-industrial-liquid-filling\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Accueil","item":"https:\/\/www.mom-packaging.com\/en\/home\/"},{"@type":"ListItem","position":2,"name":"Complete guide to industrial liquid filling"}]},{"@type":"WebSite","@id":"https:\/\/www.mom-packaging.com\/#website","url":"https:\/\/www.mom-packaging.com\/","name":"MOM PACKAGING","description":"La Main d&#039;Oeuvre M\u00e9canique","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.mom-packaging.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Person","@id":"https:\/\/www.mom-packaging.com\/#\/schema\/person\/7ad48240968f1edc107f1b57d4a5db40","name":"Aliz\u00e9e Moreau","url":"https:\/\/www.mom-packaging.com\/en\/author\/alizeem\/"}]}},"_links":{"self":[{"href":"https:\/\/www.mom-packaging.com\/en\/wp-json\/wp\/v2\/posts\/10824","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.mom-packaging.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.mom-packaging.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.mom-packaging.com\/en\/wp-json\/wp\/v2\/users\/8"}],"replies":[{"embeddable":true,"href":"https:\/\/www.mom-packaging.com\/en\/wp-json\/wp\/v2\/comments?post=10824"}],"version-history":[{"count":3,"href":"https:\/\/www.mom-packaging.com\/en\/wp-json\/wp\/v2\/posts\/10824\/revisions"}],"predecessor-version":[{"id":11087,"href":"https:\/\/www.mom-packaging.com\/en\/wp-json\/wp\/v2\/posts\/10824\/revisions\/11087"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.mom-packaging.com\/en\/wp-json\/wp\/v2\/media\/10825"}],"wp:attachment":[{"href":"https:\/\/www.mom-packaging.com\/en\/wp-json\/wp\/v2\/media?parent=10824"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.mom-packaging.com\/en\/wp-json\/wp\/v2\/categories?post=10824"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.mom-packaging.com\/en\/wp-json\/wp\/v2\/tags?post=10824"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}